Mantis 5000 Especificaciones descargar pdf (Pagina 18)

1. Unpack M3 and screw it into the "R" position. Set the mirror alignment pins into the

correct locator holes and secure the mount with the mounting screw. Refer to figure 19.

2. Remove the accessory cover.

Figure 16. Removing the accessory cover.

3. Remove the light seal/guillotine.

Figure 17. Removing the light seal.

4. Remove the magnetized covers from the reference and reflectance ports.

5. Install the centre mount port plug into the top of the sphere. Refer to figure 19.

6. Install the specular port plug. Refer to figure 19.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 87 88

Sin comentarios

Mantis 5000 Especificaciones Pagina 18