Mantis 5000 Especificaciones descargar pdf (Pagina 42)

Figure 35: Installing the small spot kit.

2. Install the iris assembly in the position shown above. The mounting plate for the iris is

magnetized to hold the iris firmly in place. Two adjustment controls are provided on the

iris, one for adjusting the iris position laterally and one for controlling the aperture size.

Open the iris fully.

3. Remove the lens holder from the dovetail base and mount the rail onto the accessory

base plate as shown. Load reflectance standards at the reference and reflectance ports.

Figure 36. The small spot kit in the DRA.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 87 88

Sin comentarios

Mantis 5000 Especificaciones Pagina 42