Mantis 5000 Especificaciones descargar pdf (Pagina 88)

(clip) difference angles. Samples are clipped into place.

Centre mount

cuvette holder

Centre mount holder for cuvettes. Fits into the top of

the sphere.

79 100387 00

Transmission

cuvette holder

Holds standard 10 mm quartz cuvettes in %T port of

DRA. Mounts to the transmission port holder.

79 100383 00

Solid sample

holder

79 100478 00

Aperture kit

Kit containing 3 x apertures (1 mm, 2 mm and 5 mm),

4 small spacers and 1 large spacer. Select an aperture

plate slightly smaller in diameter than the sample

surface and a spacer small enough to clamp the sample

against the outer aperture plate surface.

79 100381 00

Small spot kit (with apertures)

Samples must be greater than 3mm in width and length. The kit includes the following:

Item Description Part number

Small spot kit

Kit containing, iris and lens for focusing the sample

beam for taking measurements of small samples at the

reflectance port.

79 100472 00

Powder cell kit

Item Description Part number

1 x Powder cell

kit

Fits inside the reflectance sample holder in the same

manner as the reflectance standard. Each sample

holder comes as a set: one cell with a Spectralon insert

for use as a reflectance standard, and an empty cell for

loading the powdered sample

79 100477 00

1 2 ... 83 84 85 86 87 88

Sin comentarios

Mantis 5000 Especificaciones Pagina 88